Unfortunately there is no setting for the servo speed. The specific servo parameters can be set in the hardwaresetting table and are the following:
"frequency": working frequency of the servo
"min": minimum of the duty cycle -> correspond to position 0
"max": maximum of the duty cycle -> correspond to position 100
It is possible to add a second servo, but if you use it associated with a camera, in that case only one servo can be associated with one camera, so the second servo can be used for another camera for example, The system supports both raspberry camera and USB camera. The raspberry camera is great, but unfortunately as I know only one can be attached to the raspberry.
Hello,
Unfortunately there is no setting for the servo speed. The specific servo parameters can be set in the hardwaresetting table and are the following:
"frequency": working frequency of the servo
"min": minimum of the duty cycle -> correspond to position 0
"max": maximum of the duty cycle -> correspond to position 100
It is possible to add a second servo, but if you use it associated with a camera, in that case only one servo can be associated with one camera, so the second servo can be used for another camera for example, The system supports both raspberry camera and USB camera. The raspberry camera is great, but unfortunately as I know only one can be attached to the raspberry.
Regards,
Angelo