The Switches will be implemented in the next SW release, the SW will include possibility to configure the switches and assign them to specific GPIO PIN.
Furthermore I'm working on a new board which will includes Switches and all the connections to neatly connect the pieces.
I'll release more info on the boards in the coming weeks.
please can you add UI to start system manully for certain time.and watering delay function like rainbird controller.they offer upto 14days delay for watering.
Maybe just place a switch in parallel to the relay, one switch for each relay. When the switch is ON the valve will be activated, when it is OFF the relay will activate the valve according to the program. Better use a switch with light to signal that the valve is open.
Hi Christof, currently the GPIO pin assigned for relay, can be manually activated for a defined period of time up to 300 seconds. I prefer this implementation because the relay will eventually switch off automatically even if you forget to manually switch off. In case you require longer activation time for manual activation, I might include it in the next release, let me know you view.
Push Buttons can now be used to activate the relays manually. The time and mode of the activation can be set using the web interface.
You can refer to the following video as example:
https://www.youtube.com/watch?v=cPKRlBcG6zQ
Additional documentation can be found in the website under the Hardware page:
https://hydrosysblog.wordpress.com/hardware/
The Switches will be implemented in the next SW release, the SW will include possibility to configure the switches and assign them to specific GPIO PIN.
Furthermore I'm working on a new board which will includes Switches and all the connections to neatly connect the pieces.
I'll release more info on the boards in the coming weeks.
please can you add UI to start system manully for certain time.and watering delay function like rainbird controller.they offer upto 14days delay for watering.
Maybe just place a switch in parallel to the relay, one switch for each relay. When the switch is ON the valve will be activated, when it is OFF the relay will activate the valve according to the program. Better use a switch with light to signal that the valve is open.
Hi Christof, currently the GPIO pin assigned for relay, can be manually activated for a defined period of time up to 300 seconds. I prefer this implementation because the relay will eventually switch off automatically even if you forget to manually switch off. In case you require longer activation time for manual activation, I might include it in the next release, let me know you view.