Hello, i have my test setups and am still playing with them, i having some problems with relay activation times
Schema 14 (Pump) run-11:00 for 2 minuets Actual time run 4
Schema 15 (Valve) run 11:00 for 30 seconds actual run time 60 seconds
Schema 16 (valve) run 11:01 for 30 seconds actual run time 60 seconds
I have 2 water drops on the active windows. there are no delays set also no sensor interventions a stock watering plan.
Clock is set via NTP and all looks to be running as normal there its just the duration of the relays
any ideas why my timings are out
Hi, yes that was how i set it up, and after having a play around i have got the valves to run at 30 seconds but the pump runs on for 4 minuets not 2 and its set with 1 water drip. have i missed any thing or its just being difficult lol. its not a big problem now as it will have 2 more valves added later and the pump will just keep pressure in the line its just bugging me 😂 i will keep playing as i have had loads of fun
well, the number water drops is the multipliers that apply to the watering time, if you set to one water drop you will get the duration you have set in the watering schema.